Your refrigerator is designed to last for an average of 20 years if well-maintained. Its primary function is to keep foods cold and fresh. If it’s not keeping your food as fresh as you’d like, then there is a problem with it, and you need to fix it immediately.
However, there are certain things you can do before you invite quality appliance repair Calgary LTD for a professional check-up.
Checking for all possible reasons your refrigerator isn’t cooling can help you find the right solution and get back to enjoying your cold drinks. Here’s a list of the possible causes and how to fix them.
Lack of Proper Air Circulation
Air circulation in your refrigerator plays a vital role in cooling. If the air is not circulating into the compartments and the compressor, all of the food in there will stay at room temperature instead of getting chilled down to their proper temperatures.
To fix this, ensure that the air vents are clear and there are no obstructions like too many items on top of the coils, as the extra weight might make it hard for the compressor to cool everything evenly. Also, try cleaning out some food items like fruit and vegetables before putting them back into your fridge.
Dirty or Broken Gasket Seals
If your refrigerator isn’t cooling properly, you may have a faulty gasket door. The gasket door seals up the gap between the refrigerator and its walls, preventing air from entering or leaving the compartment in which your food is stored. If this part of the fridge does not work properly, it will cause a loss of cool air and lead to food spoilage.
If you notice that your fridge isn’t keeping food cool enough, you can check for any leaks around the door; this could be an indication that there’s a problem with the gasket. You should also ensure that the rubber gasket is not dirty, moldy, or warped. If you find any visible damage, then you may have to replace the gasket door entirely.
Temperature Control Is Improperly Set
If your refrigerator is not cooling properly, the temperature control is likely improperly set. This could be due to an accidental brushing against the temperature control knob. It’s important to note that most refrigerators are designed to maintain a temperature below 40 degrees F.
To fix the issue, reset the thermostat and observe the changes for about 24 hours. Ensure you use a thermometer to monitor the temperature change.
Understocked or Overstocked Refrigerator
Refrigerators should be stocked with enough food and drinks to function optimally. If your fridge is overstocked, the doors may not be able to close properly, which means that the temperature inside the fridge will be lower than it should be. If your fridge is over 75% stocked, then it’s probably overstocked
Also, an understocked fridge will find it hard to maintain a cool temperature. One way to check if your refrigerator is understocked is to take a look at the number of items in each drawer or section.
Condenser Coils Are Dirty
Condenser coils are located in the back of your refrigerator, near the drain line. They absorb heat from the air around them and then dissipate it into the air inside your fridge. If they’re clogged up with dust and dirt, they won’t be able to do their job very well, which means that your food will not be as cold as it should be.
Your refrigerator’s condenser coils need to be cleaned at least every six months. You’ll need to slide the refrigerator out, after which you can easily clean the coils with the hand attachment on a vacuum cleaner. Be careful not to damage the coils while cleaning.
Electric Supply Is Faulty
If your refrigerator is not cooling, the first thing you should check is whether or not the power outlet is working properly. If you have a grounded outlet, make sure it’s plugged into a wall socket that has power going to it. If this isn’t possible, try plugging in another appliance to see if it works. If so, you can assume that the outlet itself is faulty and needs to be replaced with a new one.
Understanding the different causes of a refrigerator that’s not cooling is key to properly diagnosing and treating the problem at hand. However, if you’ve tried the above and there are no changes, it’s best to contact a trained professional. They will be able to investigate and find out the best way to fix the issue.