Mixture Gasses are those that contain a mixture of 2 or more types of gasses depending on the needs and applications of customers, such as work in research laboratories. Calibration of analytical equipment electronics industry Department of Food Industry steel industry Or may be able to divide the gas easily mixed into 2 types.
udo.co.th The equipment center, grinding machines, grinding wheels and various tools for welding work of all kinds. We have a team of highly experienced professionals to give advice and consultation to all customers.
- Simple Mixed Gasses such as argon mixed gas in welding gas mixtures in the calibration of analytical instruments, etc.
- Complicated Mixed Gasses are mixed gasses that require tools. Precise Mixing Technology Because there may be dozens of gasses and some gasses may contain only the ppm principle, so the production must be very precise.
Argon mixed gasses for welding TIGCS-Argon Mixed Gasses (AMG)
It is a new blended gas specifically formulated for GMAW (MIG/MAG) welding of carbon steel (Carbon Steel), Mild Steel (Mild Steel) and Low Alloy Steel.
AMG can be used in all welding positions. Both in single welding and over welding, in Dip mode (Short Circuit), Pulsed mode and Spray metal transfer mode, provides stable arc and can weld at high speed, easy welding, good quality welding line. Reduce metal flakes on work surfaces Reduce production costs And can be used instead of CO2 gas to achieve higher welding quality.
The AMG mixture is a gas mixture of argon, carbon dioxide and oxygen. (in small quantities), which each type of gas has different properties as follows
- Argon – Provides a stable arc. Can be welded in Spray mode.
- Carbon Dioxide – Provides a deep, strong weld line.
Oxygen – allows complete spray mode welding, reducing spatter on the work surface. and get the welding line that has the appropriate convexity
Types of AMG– There are 3 types.
- AMG Lite : For workpieces with a thickness of 1-4 mm. Helps reduce heat accumulation in the workpiece. provide a beautiful welding line Reduce distortion in welded parts and prevent workpiece penetration. Suitable for the automotive industry and thin steel sheet welding.
- AMG Universal : For work pieces with a thickness of 2-12 mm, providing good welding work. It can be used in applications with various welding settings, such as different thicknesses, different current values. and different welding provides a fast welding rate Suitable for general welding work.
- AMG Heavy : For workpieces with a thickness of 10 mm or more, provide a high penetration weld line. The welding line is wide and strong. Can be used for welding FCAW and GMAW, works well for overlapping. Can be used with all vertical welding positions. or overhead in DIP mode, suitable for steel structures and heavy industry
highlight
- Three cars connect quickly. and get a good welding line
- A stable arc is obtained.
- Reduced oxidation
- Reduce deformation and welding through the welding piece.
- Use less welding wire.
- Able to set up a variety of welding
- Both DIP, Pulsed and Spray metal transfer modes are available.
BENEFITS OF USE OF AMG*
- 36% reduction in wire use.
- 33% faster welding time.
Productivity increased by 31%
Gas consumption reduced by 42%
Overall cost reduced by 24%
*** Remarks: The test was done at the 4-wheel drive vehicle body factory. The specimen was 3 mm. thick and the wire size was 1.2 mm. Use of carbon dioxide and AMG gas
